Today’s DC batteries are generally used in two kinds: Dedicated Li-ion battery and 5 AA batteries (Ni-MH rechargeable battery most commonly used). Dedicated Lithium-Ion battery, light weight, large capacity, environmental protection, virtually no “memory effect”, but are expensive, general poor, but also a lot of fakes. Ni-MH battery is a high capacity electric discharge depth of large, resistant to overcharge and over discharge, charging time is short and so obvious advantages. The most important is the nickel-metal hydride batteries are cheap and versatile.
No matter what kind of battery, as long as with the DC sales, generally, there will be instructions in the use of attention, some companies will even print a separate report on guidelines for the use of acer btp-58a1 battery and chargers. These instructions are some of the most basic but also very necessary to the maintenance of way, such as battery charging method should be selected, charge time. Unfortunately, many users of these instructions are often ignored or shelved. Recommendation: For the DC novice, take a little time to read these guidelines, is absolutely necessary.
Ordinary users the use of DC in the process of the battery storage packages are often not specific; users to replace the battery, will acquire the habit of readily put away the battery, regardless of where the place is clean and moist. This consequence is that the battery they get dirty easily, easy-to-metal contact (such as keys), etc. contact, easy to damp, and these are the enemy of acer btp-59a1 battery. Proposal: Users should set up a special cell to place points, and keep the battery clean. In order to avoid problems such as loss of electricity to keep the battery and battery contact points at both ends of the lid of the internal clean, if necessary, use a soft, clean dry cloth graze.
If you do not use DC, when a long time, you must remove the battery from the machine and kept in dry, cool environment. We are all no objection to this point, but why here to make up for discussion? Because, here, to another build question: For the Ni-MH battery, the battery should be fully discharged and then save, save, or live? This is two kinds of different views of what it should be used? Many people think that we should adopt the former, but I thought that to save the battery charged is reasonable. Because: According to tests, Ni-MH acer btp-60a1 battery to save the best conditions to save about 80% charged. This is because the nickel-metal hydride batteries self-discharge high (10-15% a month or so), if the battery is fully discharged and then save, for a long time not to use, the battery self-discharge phenomenon will result in excessive battery discharge, will be damage the battery. Do not believe it? Then you think about buying a new nickel-metal hydride rechargeable batteries is not all there is electricity, which is the reason. Recommendation: more compared to correct the wrong point of view, from the maintenance of the battery to start in the right direction, otherwise it will backfire.
